All the lower compartment doors have a slight adjustment on the hinges.
To adjust you must have a #3 square drive bit. The screws look like 6 point but are really 8 point. The screws are a odd size so grinding a tiny bit off the 4 sides help fit the screw better. Maybe you can fine a 8 point bit.
Try to remove the screw, there maybe a nut on the back side behind some black goo hiding the nut.
Move the door hinge away from your interference. Check alignment especially with adjacent door.
I've also bent edges of doors to get clearance.
This all take time and lot of patience.
15 Fleetwood Discovery.
2015 Fleetwood Discovery 40E on a Freightliner XCS chassis with a Cummins ISL9 pulling 1 and/or 2 motorcycles, '07 Honda Accord OR a 17' Runabout Boat.