Flair Affair...an 18 year old named "Wanda L..."

[Motor7]

Intake cap missing:


Drainage pipe parts;




installing screen to keep the mice out:

[Motor7]

All done:

[Motor7]

No pic's, but I removed the drivers side window which was leaking. Turns out the Fleetwood employee doing window cut out's that day must have had his mind on something else.....the top two radius's of the cut out were both 1/8" larger that the window itself.....up on the ladder I could see daylight right into the interior....no wonder the thing was leaking. I used rv caulk to fill the holes, then 3M5200 over that to seal it up permanently.

Chasing down a leveling jack that falls slowly down while driving....pretty sure it's a bad valve at the pump.

Also working on a "perceived" high temp problem which may or may not exist.

[Motor7]

I used slats to fill in the big gaping hole where the antique tv lived, then mounted the swing arm bracket to those slats;






I left a slot at the bottom for maps & paperwork:

[PushedAround]

Looks like it's coming along great.

[Motor7]

A pic of the Garmin Dezl on the flex RAM mount: