Originally Posted by KF5UMC
Not sure where the fuse is but do you have a control box? See link. this is what I have. You can unplug the awning power cable (patio motor) from the box then use a 12 vdc power supply and connect the 2 wires from the power supply to the awning cable and operate the awning motor. You might need to reverse the 2 wires from the power supply to the awning cable to get the awning to reverse.
Hi John. I do have that exact box. If I'm understanding you correctly that would be a temporary fix if I needed to get the awning retracted. First I'm looking for the fuse to see if that's the problem before moving on to more expensive solutions. Although that will tell me if the box is the problem but a fuse is still my first priority. Simplist first
I did remove that box and unplug then replug each wire to see if one may have been unseated. I didn't take the box apart as there didn't seem to be an easy way to do that and that's still lower on my list of troubleshooting then a fuse. I can't imagine there not being a fuse somewhere for that box and/or motor.
I can call Fleetwood Monday to find out if/where there is a fuse is no one here knows where it might be. Just wanted to use my awning this weekend and don't want to go through extensive troubleshooting if it's a simple fix.