Mr. Dave's write up was certainly helpful in where to get started. In my case I had several screws holding it from various angles. I had the impression that some of the screws were factory and others had been added by a previous owner or tech. As I recall I had to remove either the jacks control panel or the switch(fans etc.) panel to get to one of the screws. Seems like I had to pry the console away from the curved extension piece that runs toward the door. Once all the screws are removed the console should move easily, you will have to scoot it around to complete the floor.
"weekend tailgater" 2003 Fleetwood Revolution 40C, 2Vino Scooters hitch rack or H-D FLSTC & XL1200 So. Ga. Cargo Enclsd Trailer-Prodigy wireless brake controller