Community Forums

KF5UMC · 03-29-2016, 07:03 AM

I noticed my 40XL Discovery, it might be missing both Freightliner logo caps that fits on the two front wheel moon covers. All I see is a 3-4 inch hole and the actual axle cover. Am I correct? and if so where can I get replacements?

Thanks as always,

Mac99 · 03-29-2016, 09:09 AM

These guys have everything !

Phoenix USA

no3putt · 03-29-2016, 09:22 AM

We were missing the 2 front ones, though they might have fallen off, but after seeing how they go on, figured the motorhome that was parked next to us in Death Valley wanted them and took them and were gone when we got back from outing.

pagosajoe · 03-29-2016, 09:29 AM

Our 2012 Discovery 36J, Freightliner chassis, has no covers on the front axles. Asked the dealer when we bought it, they said they don't come with covers.

hypoxia · 03-30-2016, 05:59 AM

I wouldn't want covers on them. The hole is there to allow you to pull the rubber cover off and check the oil level in the front wheel bearing.

Tha_Rooster · 03-30-2016, 03:27 PM

You can get them at the wheel manufacturer probably accuride or alco my opinion they look a lot better on.

Gary RVRoamer · 03-30-2016, 04:05 PM

Or direct from Freightliner.

hypoxia · 03-31-2016, 07:37 AM

I just looked up my wheel on Freightliner Parts Pro & there was no cap for the hole. You can buy the moon with no hole, very inexpensive but Ill bet you'll never check your hub oil if you go that route.

I would think they only used the moons with an inspection hole on oil filled hubs. On greased bearings there wouldn't be a reason for a hole.

22-53320-000 by FREIGHTLINER - CAP-HUB F