|
12-26-2015, 10:37 PM
|
#1
|
Senior Member
Vintage RV Owners Club Fleetwood Owners Club
Join Date: Mar 2013
Location: c above
Posts: 5,525
|
Help with KarKaddy
Unhappy, HELP
We just got into Abilene Tx. Man what a day . We had to stop for a couple hours today, could hardly keep the old gal in between the lines. Saw a few people that were blown right off the hwy and into a farmers field. We ended up coming down 277 bad choice, Glad both tanks were full.
So any how pulled into the Flying J in Abilene and noticed that one of the bolts that holds the wheel onto the axel is missing and the weld has broken, on the KarKaddy This place has no shop. I am hoping that we can find a couple bolts at a Hardware store tomorrow but no clue about a welder,
Do we have any fellow RVer's that can help us out?
Talked to a guy at the pumps in a class c that just came from ElPaso and told us that it has been snowing since One O-Clock this afternoon. We will see what happens in the morning.
Still having my coffee. yum
Help,
Tim
__________________
1982 Pace Arrow P30 454
KarKaddy SS, Toad: 2009 Genesis
Tim, Joe and Lilly too. Mpls Minn.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
12-26-2015, 10:48 PM
|
#2
|
Community Administrator
Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Sep 2010
Location: Marquette, Michigan "Da UP" & Lehigh Acres Florida
Posts: 21,827
|
Any mobile welders listed on line or in the the phone listings for the area?
__________________
John & Cathy R.
06 Pace Arrow 38L Workhorse W24
|
|
|
12-27-2015, 01:24 AM
|
#3
|
Senior Member
Fleetwood Owners Club Ford Super Duty Owner
Join Date: Jun 2012
Location: SoCal
Posts: 15,749
|
Craigslist or a local jeep/off-roading club may be sources to find a mobile welder. Good luck!
__________________
Vince and Susan
2011 Tiffin Phaeton 40QTH (Cummins ISC/Freightliner)
Flat towing a modified 2005 Jeep (Rubicon Wrangler)
Previously a 2002 Fleetwood Pace Arrow 37A and a 1995 Safari Trek 2830.
|
|
|
12-27-2015, 01:28 AM
|
#4
|
Senior Member
Vintage RV Owners Club
Join Date: Sep 2015
Location: East Moline, IL
Posts: 169
|
I can only offer moral support, but you do have that ... for what it's worth. Good luck to you.
|
|
|
12-27-2015, 05:42 AM
|
#5
|
Moderator Emeritus
Nor'easters Club Fleetwood Owners Club Workhorse Chassis Owner
Join Date: Dec 2011
Location: NH
Posts: 5,099
|
[QUTE=JohnRR;2876416]Any mobile welders listed on line or in the the phone listings for the area?[/QUOTE]
Good luck and keep us posted.
__________________
Bruce & Nancy
FMCA F280542
2004 Bounder 35E
US Navy Vet.
|
|
|
12-27-2015, 06:06 AM
|
#6
|
Senior Member
Join Date: Jul 2014
Posts: 35,442
|
Drop the car off the dolly and tow it empty, until you get to a welder, if still towable.
That's as long as the "We" in your post can drive.
|
|
|
12-27-2015, 06:42 AM
|
#7
|
Senior Member
Join Date: Aug 2008
Location: Georgia
Posts: 8,638
|
Quote:
Originally Posted by spritz
Unhappy, HELP
We just got into Abilene Tx. Man what a day . We had to stop for a couple hours today, could hardly keep the old gal in between the lines. Saw a few people that were blown right off the hwy and into a farmers field. We ended up coming down 277 bad choice, Glad both tanks were full.
So any how pulled into the Flying J in Abilene and noticed that one of the bolts that holds the wheel onto the axel is missing and the weld has broken, on the KarKaddy This place has no shop. I am hoping that we can find a couple bolts at a Hardware store tomorrow but no clue about a welder,
Do we have any fellow RVer's that can help us out?
Talked to a guy at the pumps in a class c that just came from ElPaso and told us that it has been snowing since One O-Clock this afternoon. We will see what happens in the morning.
Still having my coffee. yum
Help,
Tim
|
I believe the bolt that holds the wheel on the axle is called a stud and they are pressed on and should be able to get one at any auto parts store. What weld was broken?
__________________
2007 Fleetwood Revolution LE 40V
|
|
|
12-27-2015, 10:10 AM
|
#8
|
Junior Member
Join Date: Jun 2011
Posts: 5
|
Werner Diesel should be able to help you. Their phone number is: 325-603-3105. They've done some work for us and we were very pleased. They are in Tye which is near where you are.
|
|
|
12-27-2015, 10:16 AM
|
#9
|
Senior Member
Newmar Owners Club
Join Date: Oct 2009
Posts: 10,310
|
Quote:
Originally Posted by spritz
Unhappy, HELP
We just got into Abilene Tx. Man what a day . We had to stop for a couple hours today, could hardly keep the old gal in between the lines. Saw a few people that were blown right off the hwy and into a farmers field. We ended up coming down 277 bad choice, Glad both tanks were full.
So any how pulled into the Flying J in Abilene and noticed that one of the bolts that holds the wheel onto the axel is missing and the weld has broken, on the KarKaddy This place has no shop. I am hoping that we can find a couple bolts at a Hardware store tomorrow but no clue about a welder,
Do we have any fellow RVer's that can help us out?
Talked to a guy at the pumps in a class c that just came from ElPaso and told us that it has been snowing since One O-Clock this afternoon. We will see what happens in the morning.
Still having my coffee. yum
Help,
Tim
|
Hello Tim, sorry to read of your troubles
Can you better explain what is missing and cracked on your dolly? Can you post some photo's of your problem? Sounds like you have 2 problems, a broken wheel stud and a cracked weld............
__________________
2012 Essex 4544 2011 Jeep JK, M&G Braking, 2014 MTI 27' Hog Hauler, Wireless brake control, 2006 Ultra & 1989 Springer, 2003 Harley-Davidson
FLHR Road King Anniversary
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|