Quote:
Originally Posted by Tha_Rooster
Power at switch?
If yes relay would be next to check in my opinion.
|
I do have power out of switch. I removed and bench tested relays and both test ok. I seem to be losing power between the switch and the relays. If I turn the headlights on via the wipers control on smartwheel, then turn the headlight switch on, it will shut the headlights off. I'd just like to know if the headlight circuit and smartwheel controls are independent of each other as the smartwheel master in the lower compartment had gotten wet at one point, but all smartwheel functions are working perfectly. Wondering if when the switch is turned on if something is shorting out causing the lights to turn off. I do not have constant 12V to the #30 pin at relay unless the key is on. I would think I would have power there as the lights should work without the key on as the parking lights do. I was hoping to get schematics to know what to look for, however I guess they're not available. Seems to be turning into a non DIY project. Having someone look at it this week.
Again, thanks for your responses . Bob
Linear Mode
