Bounder: Lucky Find

[RCCFleetwood]

Originally Posted by Unplanned

Eureka! Found out 4 screws and front cover comes of accessing dash innards so now I'm happy. Putting 3 gauges in dash as well as dual USB outlet!

I'm hoping to replace my radio with a newer one that has USB built-in! (Along with other goodies)

[RCCFleetwood]

I went out to look at my dash, and it appears to be on hinges, too, but something seems to be catching when I lift it up a couple inches. I'm going to have to figure out what that is before I lift too hard on it, and it's too cold out there still...

Anyone else notice that when lifting it up, and already know what it is?

[Old Bounder]

Originally Posted by RCCFleetwood

I went out to look at my dash, and it appears to be on hinges, too, but something seems to be catching when I lift it up a couple inches. I'm going to have to figure out what that is before I lift too hard on it, and it's too cold out there still...

Anyone else notice that when lifting it up, and already know what it is?

My '97 Bounder has a strap, with a snap on the end, that hangs down and snaps to the steering column on the right side. I've never snapped it back since I originally unsnapped it. That might be your situation.

[RCCFleetwood]

Originally Posted by Old Bounder

My '97 Bounder has a strap, with a snap on the end, that hangs down and snaps to the steering column on the right side. I've never snapped it back since I originally unsnapped it. That might be your situation.

Thanks! I didn't notice one, but was not looking for one, either. I'll have to check for that next time I'm in it.