 |
|
05-12-2020, 10:34 AM
|
#1
|
|
Junior Member
Join Date: Oct 2019
Posts: 9
|
Luggage Door Centering Clips
Does anyone have a good source for the basement door centering clips? I have a 2000 Fleetwood Southwind 35S.
__________________
2000 Fleetwood Southwind 35S
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
05-14-2020, 03:47 PM
|
#2
|
|
Senior Member
Winnebago Owners Club Workhorse Chassis Owner
Join Date: May 2016
Location: Kamloops, BC, 60 miles from the Center of the Universe according to the Rinpoche, of the SF monks.
Posts: 7,367
|
Not sure what you are looking for.
If you post a picture, I'm sure someone will be able to help you.
Happy Glamping.
__________________
Happy Glamping, Norman & Elna. 2008 Winnebago Adventurer 38J, W24, dozens of small thirsty ponies. Retired after 40 years wrenching on trucks! 2010 Ford Ranger toad with bicycles or KLR 650 in the back. Easy to spot an RVer, they always walk around with a screwdriver or wrench in one hand! 
|
|
|
|
05-14-2020, 08:11 PM
|
#3
|
|
Senior Member
Join Date: Mar 2009
Posts: 1,717
|
Pokegama, I just sent a message to a guy that used to make those clips. It's a Fleetwood deal. Some Other Brands (SOB) don't know what they are.
Lets see if he responds.
Richard
__________________
95 Bounder 32H F53
460
|
|
|
|
|
05-15-2020, 06:51 AM
|
#4
|
|
Junior Member
Join Date: Oct 2019
Posts: 9
|
Thanks! Here’s a photo of a broken one. Seems to be a plastic type material. They keep the doors from sliding sideways and banging into each other. I pretty much need to replace them all.
I’ll have to learn how to rotate photos too!
__________________
2000 Fleetwood Southwind 35S
|
|
|
|
|
05-15-2020, 06:58 AM
|
#5
|
|
Moderator Emeritus
Newmar Owners Club
Join Date: Apr 2014
Location: Southern Indiana
Posts: 19,417
|
Do you know anyone with a 3d printer?
I printed some for our doors.
__________________
Steve
2002 Newmar Mountain Aire 4095
|
|
|
|
|
05-15-2020, 07:16 AM
|
#6
|
|
Junior Member
Join Date: Oct 2019
Posts: 9
|
Could you print more? I would be happy to pay!
__________________
2000 Fleetwood Southwind 35S
|
|
|
|
|
05-15-2020, 07:21 AM
|
#7
|
|
Moderator Emeritus
Newmar Owners Club
Join Date: Apr 2014
Location: Southern Indiana
Posts: 19,417
|
I could provide the files. Unfortunately would not be able to print more or sell.
If you have a local Hackerspace type shop. They could print them or there are places online that can print files for you.
__________________
Steve
2002 Newmar Mountain Aire 4095
|
|
|
|
|
05-15-2020, 08:17 AM
|
#8
|
|
Moderator Emeritus
Newmar Owners Club
Join Date: Apr 2014
Location: Southern Indiana
Posts: 19,417
|
__________________
Steve
2002 Newmar Mountain Aire 4095
|
|
|
|
|
05-15-2020, 08:21 AM
|
#9
|
|
Junior Member
Join Date: Oct 2019
Posts: 9
|
That’s some great information! Thank you! 
__________________
2000 Fleetwood Southwind 35S
|
|
|
|
|
05-15-2020, 09:16 AM
|
#10
|
|
Senior Member
Join Date: Mar 2009
Posts: 1,717
|
I contacted my friend that used to make those door alignment parts. He is sick and may have the Covid. So he's not an option.
Richard
__________________
95 Bounder 32H F53
460
|
|
|
|
|
05-19-2020, 07:19 PM
|
#11
|
|
Junior Member
Join Date: Oct 2019
Posts: 9
|
Thanks for checking with him, I hope he is doing well.
I did order some from 3D printed ones from Craftmakers. I’ll let everyone know how they turn out.
Thanks to all,
Jeff
__________________
2000 Fleetwood Southwind 35S
|
|
|
|
|
06-03-2020, 08:29 AM
|
#12
|
|
Junior Member
Join Date: Oct 2019
Posts: 9
|
Quote:
Originally Posted by Spk64
|
I ordered some of these from CraftCloud. They arrived but they are about half the size they need to be to work.
SPK64, Did I do something wrong when I ordered them. Do I need to specify a size or dimension to have them printed at the correct size? I’m new to the 3D world so any help would be greatly appreciated.
__________________
2000 Fleetwood Southwind 35S
|
|
|
|
|
06-03-2020, 08:44 AM
|
#13
|
|
Moderator Emeritus
Newmar Owners Club
Join Date: Apr 2014
Location: Southern Indiana
Posts: 19,417
|
Can you take a picture with a ruler or something to provide scale to the image?
__________________
Steve
2002 Newmar Mountain Aire 4095
|
|
|
|
|
06-04-2020, 02:21 PM
|
#14
|
|
Junior Member
Join Date: Oct 2019
Posts: 9
|
Here’s the picture with ruler.
I did order some from RV Parts Center. Their SKU# 60827 called Fleetwood Compartment Door Center Molding Stop 2-Pack at $6.95 for a pair. They look like the right thing.
I will let everyone know it they are correct when they arrive.
__________________
2000 Fleetwood Southwind 35S
|
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
 Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
