Bounder: Magnum Inverter

[LSC9901]

2009 Bounder 34H. I'm trying to determine what size inverter we have. It is a Magnum and due to the area it is in, it is difficult to see much info that might be on it. Where on the Magnum units will I find the model number ?

[AlanTerry]

Give these guy’s a call they should be able to help you with that.

Sensata Technologies at: Telephone: 425-353-8833

[LSC9901]

Thanks. I've emailed them already. If I don't hear from them within a reasonable amount of time I will call. I was really hoping someone here would have the answer.

[tcgoetz]

Do you have a remote panel for your inverter like this?





If so, you can read the model and version of your inverter fromt he remote.

[LSC9901]

No I do not have this display. Mine is just a series of idiot lights.

I believe it is either a MM 1012E or MM 1324E

[LSC9901]

After a bunch of searching I finally found the location of the information I was looking for. The tag is located on the backside of the unit. I have one of those WiFi inspection cameras so I was able to stick the head of it back there and was able to acquire the info I was looking for.

Thanks

[Tha_Rooster]

You can also google the brochure of your unit.

[LSC9901]

Now that I know which unit it is, yes I can do that. My issue was that I didn't know the model number nor where on the unit I could find it.

I did find that info and now have the correct manual for it.

[rquiri]

I'm replacing a xantrex 458 with a magnum full sine inverter.

On the xantrex there is a 2-wire connector for an on/off switch at the coach master control panel above the door.

There's also an RJ11 flat black wire/connector connected to the 'remote' port on the xantrex.

Does anyone know where this rj-11 wire terminates or what it gets used for? It is not located in the area of the master control panel above the door.

Thanks