Bounder: Missing Intellitec EMS printed circuit board

[pinnaclemans]

I purchased a 2007 Fleetwood Bounder 35E last year. Taking it into the shop for some repairs, they discovered the Intellitec EMS printed circuit board is missing. Evident of a possible brunt board. The wires that went to the board as wire nutted together.

Intellitec says providing them the model number from the inside panel (Model 900) does not help. They need a part number from the board. He says it would be a '00-00xxxxxx" not sure how many other numbers follow the 00.

Does anyone have a 2007 Bounder 35E that could provide me the part number from the board.

Thank you so much !!

[theroc]

I'm going to guess it's a 00-00894-700

At PDX RV: Intellitec EMS Control Board 00-00894-700

They spec'd and grouped circuit boards by manufacturer back then. I think, but not positive, there were three, maybe four, boards that the Model 900 used. The one above fit the 900 model that Fleetwood used.

I'll check with a moderator to see if they want to move this to the Fleetwood Owners Forum so that somebody with the exact same coach can confirm one way or the other.