No power to genset, Expedition

[Barry and Linda]

I recently had six new house batteries installed along with a trik l start. I now have no starting power for the genset nor any 110 power when traveling. I have two inverters (one for res refrig) both showing green lights. Both cut off switches are on. Genset only clicks when trying to start (even when plugged into SP). This has all occurred since the install of the new batteries. Any thoughts as to what needs to be done to correct. BTW, ihe trik l start only shows maintaining, never shows charging. The inverter panels show 13.7 one main and 12.7 on refer inverter. Thx

[twinboat]

Post pictures of your cables. Try to get them all so we can see what's wrong. Both inverters should show same volts.

Trik l start won't show charge to charged chassis battery.

[Barry and Linda]

Best I could do, two at bottom are hard to get to.

Now both inverters read 12.4and 12.3

Obviously top two are chassis batteries

[Barry and Linda]

Note also that genset also will not start when plugged into 50 amp SP.. only hear the same clicking sound

[deblas]

Not sure if you found a fix for this but I have experienced something similar regarding the generator clicking (albeit not after having battery replacement) and found that the battery control switch, sometimes referred to as a salesman switch, was in the off position.
So make sure both switches are on for the house and chassis batteries.