Quote:
Originally Posted by John C
On my 2015 Fleetwood Bounder 35K the on power gear boxs panel the lights and alarm our going off as soon as i put it in gear. the ATF in the resurvior is full.
|
Assuming that you've pressed the 'Retract Jacks' button and that does retract the jacks somewhat, the beeping when you put it in gear what they do if the fluid is low, but you've already checked that...with the jacks retracted and the slides in if the system also powers them. Low fluid is the most common cause of that beeping so might be worth a double check.
Another cause is one of the jacks isn't fully retracted. They all need to be within 1" of the top of the cylinder or the alarm sounds, even though they're off the ground. In that case, just make a lever and lever the reluctant jack back up and worry about the cause after your trip.
Another cause is a broken wire. The jacks down alarm on older Power Gear systems was right on the side of the tank underneath and had a 18 AWG wire attached. That small gauge wire can be broken by road debris so check for that. Not sure if that's true for a '15 model but maybe worth checking.
And of course, there could be something wrong with the control itself. But they are fairly well made...or use to be.
: 
Linear Mode
