1999 Pace Arrow 36B with 2 slides. Main slide is hydraulic ram and swing arms. Goes out all the way but only retracts part way. If I push on the slide we can back-and-forth on the switch and get it all the way in.
Previous owner (I’ve figured out) was a hack so there’s lots of cheap fix bandaids on my rig. In this case he said he replaced the ram with a heavier duty one. The pump is working and fluid is full. Is it possible there’s a relief Al e that is weak and releasing fluid before it should?
Issue number 2 there are 3 rails that the slide rides on and they have what looks like an anti-friction insert in them (reminds me of the track sliders on a snowmobile). One of these is missing so slide never fully closes at the front….sticks out 1/2 inch. Any idea what these are called and where I an get them?
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Having a similar issue, turned out to be the slide rollers (located beneath the slide). I have replaced both ends and keep extra rollers just in case I need more.
__________________
'04 Newmar MADP, 1100w of solar, Rubicon toad