Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Fleetwood Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 06-30-2022, 01:29 PM   #1
Junior Member
Join Date: Apr 2022
Posts: 3
Slide not always retracting

The Dinette/hide-a-bed slide out on my 2019 Discovery LXE 40 M is not working properly. Occasionally it will not retract without trying several times. When it does this, it will move a little then stop, making a click sound. I move it out again and try again and sometimes it will go in. Sometimes I have to try several times. I have also pulled it from the inside while someone operates the switch, which seems to work. Any suggestions as what might be causing this. I also cleaned underneath where the rollers run.
Kellymc is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free! RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 06-30-2022, 02:11 PM   #2
Official iRV2 Sponsor
Join Date: Feb 2021
Posts: 658
We have been running into this on the new coaches. If you have another room with the same controller, you can swap that and see if fixes the issue. There is also a brake on the motor that be giving issues. If you have the rubber boot at the end of the motor, you can cut it loose and then remove the 4 screws holding on the brake. Try to run the room with that hanging loose. You can also lube the track under the room.
Sales | Service | Indoor Storage | Wash
Collision Repair & Paint Restoration

SM Nashville 972-697-6325
Bobby Dowdle is offline   Reply With Quote


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Water pump is always being fed 12v from hot wire and ground wire is always fed 5v PartyParrot General Discussion 11 02-28-2021 09:15 AM
Always, always, always check your lugs!!! Hatchee MH-General Discussions & Problems 12 03-27-2020 12:01 AM
Retracting stairs, not retracting Dorry MH-General Discussions & Problems 8 07-08-2018 11:45 AM
39 V Locking arms on full wall slide not working after retracting slide. Suggestions jasonracing Fleetwood Owner's Forum 4 07-03-2018 07:15 AM
Step not retracting when ignition starts & power mirrors not working. Unicorn Driver MH-General Discussions & Problems 27 01-01-2018 11:53 AM

» Featured Campgrounds

Reviews provided by

All times are GMT -6. The time now is 11:26 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2022, vBulletin Solutions, Inc.