I have a 2009 American Allegiance 42. I've been looking for the smartwheel control module for 3 days and cannot find it. I've traced the wires to the bottom firewall but then they disappear into the frame area. Anyone have any idea where it may be? I assume any smartwheel has to have the control module to work.
Trying to reset it as my cruise and wipers don't work. Or replace it.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Mine was under the dashboard to the left of the steering column close to the fuse module. Not easy to get to. Had to replace mine. Gulfstream Crescendo. Hope this helps. Merry Christmas.
My 08 Tradition is under the steps. Likely a plug has come loose. Once you find the controller, pull and reseat the plugs. You will likely have wipers and cruise control again.
On my 2003 Revolution the smart wheel controller is in the left front bin. I also have a bunch of fuses in there also.
I had a problem with the wiper controller. I was able to troubleshoot from there.
Revolution LE 38X C9 Cat
Linear Mode
