Trying to get new step mats for our 35’ Bounder. Top is 11” depth but bottom is 12”. All I ca. find only fit up to 11. Camco says theirs may not fit 12”. Anyone know if they do or if not where to find right size
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Entegra Owners Club Spartan Chassis Jayco Owners Club RV Trip Wizard
Join Date: Apr 2020
Location: roaming
Posts: 155
Check out the Press-O-Fit inside step rugs.... I just got three and was able to fit all three of the inside steps we have with all three different depths...
Working great so far...even on the grooved step material on our steps...
Check out the Press-O-Fit inside step rugs.... I just got three and was able to fit all three of the inside steps we have with all three different depths...
Working great so far...even on the grooved step material on our steps...
Kwikee recommends against the carpet on the steps. They can cause binding. If you go that way just make sure they are thin enough to not affect the articulation of the steps… or you will impact the gear or motor.
I had mine custom made by Wade in Seffner FL
They also did matching coverings for the doghouse and driver and passenger footwells. Main
__________________
I don't subscribe to threads I reply to so will not see your reply to my comment. Drop me a direct message if you want a reply from me.
Cheers!
Kwikee recommends against the carpet on the steps. They can cause binding. If you go that way just make sure they are thin enough to not affect the articulation of the steps… or you will impact the gear or motor.
I ended up taking the carpets off. They were creating rust beneath them.
__________________ Tonkin Gulf Yacht Club
2009 Fleetwood Bounder 35H
Linear Mode
