Community Forums

mrwrench · 03-01-2014, 05:45 PM

I need to know what is the fuse for cigarrete lighter and tanks monitor , 93 Bounder .
Thanks

**CLIFFTALL** · 03-01-2014, 05:53 PM

You may have a BCC ( battery control center ) under the hood. It's a black box with a lot of 12v fuses in it.

al2ride · 03-01-2014, 05:59 PM

Are you asking where the fuses are located for the cigarette lighter and black/gray tank display panel?

mrwrench · 03-01-2014, 07:29 PM

Quote:

Originally Posted by al2ride

Are you asking where the fuses are located for the cigarette lighter and black/gray tank display panel?

Yes , I already check all the fuses on the Intellitec box and the fuse box That is located under the dash .

The General · 03-01-2014, 11:38 PM

Quote:

Originally Posted by mrwrench

I need to know what is the fuse for cigarrete lighter and tanks monitor , 93 Bounder .
Thanks

Mr. Wrench,

Pull the cig. lighter and check for an inline fuse in the wiring by the lighter.
I would check for 12 volts at the tank and at the monitor switch.

mrwrench · 03-11-2014, 10:09 AM

I checked all the fuses , still no luck ,

LSC9901 · 04-04-2014, 09:40 AM

I don't want to appear more stupid than I am but what is the problem you are having ? Is the cig lighter not working, the tanks not reading or both? I was getting erroneous reading from my black tank but that was not an electrical issue.

I also have the 93 so I can probably help you out but I am just curious what the issue is.

mrwrench · 04-07-2014, 11:32 PM

Quote:

Originally Posted by LSC9901

I don't want to appear more stupid than I am but what is the problem you are having ? Is the cig lighter not working, the tanks not reading or both? I was getting erroneous reading from my black tank but that was not an electrical issue.

I also have the 93 so I can probably help you out but I am just curious what the issue is.

cigarret lighter works now after fuse replacement , and the monitor tanks still doesn't ( no power). I though that the lighter fuse is also for the monitor , but not .

**CLIFFTALL** · 04-08-2014, 05:26 AM

Quote:

Originally Posted by mrwrench

cigarret lighter works now after fuse replacement , and the monitor tanks still doesn't ( no power). I though that the lighter fuse is also for the monitor , but not .

How about your propane detector fuse. I seem to recall that it may be tied into that one. There were two propane fuses in my Bounder.
Here's a link to a previous thread that confirmed this.
http://www.irv2.com/forums/f107/99-b...el-177319.html