Originally Posted by gordonjmcc
My 1/2 bath toilet is not flushing. It is like there is no vaccum. Main bath toilet is fine. Also where do I turn the water off to that toilet?. Thanks for your help. Gordon.
2016 bounder 35 k
Not familiar with a bounder.
If you have a "water control" manifold, shut off should be there or a shutoff behind the toilet.
as for no vacuum.. When was the last time the toilet half ball seal serviced?, (easy check..If the bowl still holds water most likely still OK),
Next.. does the vacuum pump run / run continuously?
May need the vacuum pump bellows, duck bill valves & tank were serviced..?
If the pump does not run check the circuits & fuses/breakers..
If all those are "good to go" & the vacuum pump continues to constantly run..
then I would do a vacuum test on the sewer line from the toilet to the vacuum pump.."Could have a split seam or crack in the plastic connecting pipe..