|
04-08-2022, 06:38 PM
|
#1
|
Junior Member
Join Date: Apr 2022
Posts: 2
|
Wiring help!
I have a 2004 Fleetwood Jamboree 26Q. The water pump rocker switch in the bathroom stopped working, and when I took a look at it, only 1 of the 4 prongs were connected. Only moments before, the pump worked, but the light did not. I'm struggling to find a diagram on how to put the wires back on the prongs. I have a black/white stripe wire, a white/black stripe wire, a red/white stripe wire, and a white/red stripe wire. Any help would be appreciated.
I'm assuming that one is for light, 2 are for water pump, and 1 connects to the other 2 water pump switches in the RV.
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
04-08-2022, 06:40 PM
|
#2
|
Junior Member
Join Date: Apr 2022
Posts: 2
|
Sorry - wrong wire colors. Black/white stripe, white/black stripe, red/white stripe, and red/black stripe.
|
|
|
04-08-2022, 06:43 PM
|
#3
|
Senior Member
Join Date: Sep 2013
Location: West Virginia
Posts: 571
|
You need a multimeter.
__________________
2022 Keystone Cougar 24RDS
2017 F350 6.7L CCLB DRW 4x4 Ruby Red
|
|
|
04-08-2022, 06:45 PM
|
#4
|
Senior Member
Join Date: Jun 2012
Location: The Bluegrass State
Posts: 8,889
|
Here is a wiring schematic for the water pump. See if this helps:
__________________
Good Luck, Be Safe and Above All, Don't Forget To Have Fun
Pete
Central Kentucky
2006 Fleetwood Discovery 35H, 2014 Honda CR-V, M&G Engineering Braking System
|
|
|
04-08-2022, 06:47 PM
|
#5
|
Senior Member
Join Date: Jun 2012
Location: The Bluegrass State
Posts: 8,889
|
Forgot to mention, each wire should have a number on it. Match that wire number to the schematic.
__________________
Good Luck, Be Safe and Above All, Don't Forget To Have Fun
Pete
Central Kentucky
2006 Fleetwood Discovery 35H, 2014 Honda CR-V, M&G Engineering Braking System
|
|
|
04-08-2022, 06:52 PM
|
#6
|
Senior Member
Join Date: Jun 2012
Location: The Bluegrass State
Posts: 8,889
|
My coach is a Fleetwood Discovery, but if you think it will help, I can pull the switch out and take a picture of the back of it. Just let me know.
__________________
Good Luck, Be Safe and Above All, Don't Forget To Have Fun
Pete
Central Kentucky
2006 Fleetwood Discovery 35H, 2014 Honda CR-V, M&G Engineering Braking System
|
|
|
04-09-2022, 07:26 AM
|
#7
|
Senior Member
Join Date: Mar 2022
Posts: 311
|
You might have a look at one of the other switches, might have the same colors, then, you can match up the positions on the switch.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|