|
Yours may be like mine. You have a floor line molding that id also the hinge for the compartment doors. If the door is at the end of the line you are lucky; if in the middle other doors will have to be removed to get the one you want off. There is a trim that has to be removed to expose the fasteners. Remove molding far enough to get a door off and remove doors to reduce weight and continue to loosen hinge molding and doors as needed. Good luck and keep us posted.
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
|
Linear Mode
