Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Gulf Stream Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 09-07-2022, 01:43 PM   #1
Junior Member
Gulf Streamers Club
Freightliner Owners Club
Join Date: Sep 2022
Posts: 1
engine access

I have a 2007 40A and the serpentine belt has broken. I can see a lot of what I need to get to from below the coach but I believe I need to access the motor from the top to properly install the belt and get to the tensioning puller/idler. Can anyone tell me the best way to access the motor from inside the coach (my guess). I have the master bed out and am ready to take out some flooring but don't want to guess at how this happens if I don't have to. Thanks, Jeff
blacksmith3 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free! RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-07-2022, 09:49 PM   #2
Join Date: May 2020
Location: Gordo, Alabama
Posts: 45
It’s not gonna be possible from inside if it’s like my Yellowstone. Even with the bed raised and access from there the belt is too far away and not enough room. I had to remove the air filter and housing and accessed mine from the side door. Not too bad this way, still had to lay under to wrap belt. Hope I have given you some useful information.
Gulfstream Yellowstone 2007 Cummins 8.3 Diesel Pusher 330hp Workhorse Chasis
Chamner is offline   Reply With Quote

access, engine

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Engine access & engine temp Gatesway Country Coach Owners Forum 8 01-10-2018 05:02 AM
Bedroom engine access hatch, stuck or stupid? Jim Stewart Monaco Owner's Forum 5 01-16-2009 12:39 PM
dp engine access marleygirl Winnebago Industries Owner's Forum 5 09-05-2007 03:27 AM
Engine Access Door Poppop Winnebago Industries Owner's Forum 6 10-13-2006 06:13 PM

» Featured Campgrounds

Reviews provided by

All times are GMT -6. The time now is 08:59 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.