03 magna steps

[firedan]

I am replacing the slides on my steps and found this switch when i removed the steps what is it for and what wires hook to is as i see no loose or cut wires anywherehttps://www.irv2.com/forums/attachment.php?attachmentid=434523&stc=1&d=1738093 161

[birdhunter]

Does your "entry steps out" light on your dash work? That is the switch for that light.

[firedan]

no they do not didn't even know there was one thank you

[vtwinwilly]

Don't know either. Thought mine was a limit switch. It was wired to something, but appeared to do nothing.

The guts of mine were gone, so I replaced the switch with this switch from Amazon
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Switch didn't fit very well, but I wired it up anyway and still nothing.

You and I seem to be on parallel paths. I was also in the process of replacing my step slides when I discovered the same switch.

BTW . . . how's that slide seal project coming?

[birdhunter]

My entry step out light never worked. I was in there a couple of years ago working on the controller and the motor and I discovered this switch and the wiring which not connected. Once I connected the wires properly the light has worked perfectly. I suppose you could also have a bad switch.

[firedan]

slides worked out well just a pain to take the complete step down and i did get the light to work found the wires