08 Allure ride height control valve

[Ramblin Ron]

I'm sure this has been asked before but I couldn't find it. Does anyone have the part numbers for the ride height control valves for my coach? 2008 Allure 470 Syskayou Summit 42'. Dynomax chassis

Thanks!

[turbine52]

these are the new part numbers for my 08 Allure 37ft Sunset
I can't believe they have different part numbers for the 42ft.
You will need to buy swivel connectors as the new units don't have it built in.
Good luck and make sure you have it raised on jacks or support and all air drained before attempting to replace it.

Rear ride height 90554945 front 90555274

if you need info on how to measure correct ride height or how to adjust, send a PM.

[Ramblin Ron]

Thank you turbine 52. It will be a couple weeks before I install but but will definitely take you up on you kind offer for advice if needed.

[turbine52]

Make sure when you remove the old ride height valve that you note where the little bump/tab on the collar before removing arm. If you don't the shaft can operate backwards.