12v issue

[jeepersrus]

I am having problems with some of the 12v lighting in the bedroom area. The two light fixtures on each side of the bed, the light in my closet and the light in the cabinet next to the shower. The fluorescent light in the bedroom work just fine from the switches as you enter the bedroom. The two fluorescent light switches near the bed are fed from the 12v circuit that isn't working.

[tmw188]

Do you have a 12 volt circuit checker to check power to the switch? There should be a 12v panel somewhere in your rig you can check too.

[Burlroad]

If you have multiple switches that operate the same light, are any of the switches working?

[jeepersrus]

It turns out that my problem is at the fuse block. Apparently the fuse is not sitting in the fuse holder tight enough. The slightest vibration will cause intermittent power loss. I'm going to try replacing the fuse and see if it will have a tighter fit. If that doesn't work then I'll use an independent fuse holder. This is the second fuse that this happened to in this fuse block. Maybe its time to replace the fuse block. If anyone has a source for a new fuse block I would be interested.