2008 Inspire Kitchen slideout

[ergrogan]

The slide out does not fit tight against the wall when it is all the way out. The top of the slide is approx 1" to 1 1/2" inches away from the wall while the bottom is tight. On the end of the extension arms there is an adjustment to level the slide but when you adjust it so that is sits properly it will hit the coach on the bottom of the slide and not go in. Does anyone know how to correct this problem?????

[mattandcarol]

You might want to check this site for trouble shooting your problem, these folks manufactured the system on your slides. http://www.powergearus.com/documents/290.pdf
Matt

[ergrogan]

Originally Posted by mattandcarol

You might want to check this site for trouble shooting your problem, these folks manufactured the system on your slides. http://www.powergearus.com/documents/290.pdf
Matt

Thanks Matt
I am working with them at this time. It appears at this time that when the slide is all the way out the inside bottom needs to be higher to seal it at the top. When the extended side is lowered to seal it then it will not go in. Hopefully there is an adjustment for this.
Richard

[mattandcarol]

Richard is this the slide on the drivers side or passenger side? I assumed when you said kitchen it was the passenger side but now from your last post I'm not so sure, sounds more like the flat floor slide on the drivers side.
Matt

[ergrogan]

Matt
Sorry I didn't get back any faster on this. This is the flat side and the slide arm company could not provide any help. I am taking it to a local dealer on Sept 8th who says he should be able to fix it but I am a little sceptical as they haven't worked on the Country Coach line.

Richard