Community Forums

Mr_D · 05-05-2016, 06:30 PM

They must have gotten smarter as ours is in the midships electrical compartment.

Quote:

Tow Cable Jumper Pins
Proper installation of the tow cable requires the jumper pins on the tow cable fuse panel be correctly set (Figure 3.9, page 3.16). The panel is found in the electrical compartment in the center of the coach, mounted on the passenger-side bulkhead. It is covered with a black metal cover and identified by two gray flex hoses extending from the bottom of the cover.

roberto · 05-06-2016, 10:22 AM

Mr D: Here is the remaining info on the tow board info. The User's Guide illustrates on my page UG3-20 and fig 3-10 the tow board and location above the Emergency engine Shutoff. Well, that would b e great except the board is not there and as indicated in prior posts, the tow board could be anywhere.
So, my coach #30694 probably did not have a tow board installed. If and when I get to the next CC rally, I will entertain the search party with a reward if this tow board is found! HA!
Thanks again, Bob 02 CC 36 SRTS #30694

roberto · 05-06-2016, 10:33 AM

All: Here is a follow up on the Tow Bd Loc: Under Electrical Sys Gp., Chapter 6: Diag S0953 does not show a tow bd ckt for a 02 Allure. A tow bd ckt is shown on page S0952 for a 02 Intrigue. Go figure!
I have read of others with a 02 Allure(?) having this tow bd. Maybe a running production change within a model year.
Thanks, Bob CC 36 SRTS #30694