Lens for lights

[jcdata]

In the process of changing out a burned out G4 LED bulb in a ceiling light, I broke the lens.

Does anyone know where to get them?

2.25" x 1/16" thick

[wfalch]

Kevin Waite, search on here for his number

[jfnf51678]

Originally Posted by wfalch

Kevin Waite, search on here for his number

I could not get from CC. A couple of suggestions;
The glass is pretty thin do a local glass shop can cut one for you.
Since you are changing to LED’s you could contact a laser engraving company to cut one out for you. Thin frosted plastic is readily available to them. A lot of sign shops also do laser work - it’s pretty popular. Should also be inexpensive. If you are a DIY’er a hole saw will work fine. The big box home stores also sell frosted plastic.
Hope this helps.

[CelticJFK]

How were you able to use LED lights. I have an 07 Intrigue Ovation II but the light fixture is not large enough to install the larger G4 LEDs.

[RV-LEDs]

Sorry I couldn’t help JCDATA with his lens. The problem in getting them cut is the thickness of the glass. The only ones I have left is 15/8 in. Country coach used several different size trim rings with different size lens but the fixture is the same. I do have some fixtures and trim rings on my website but they have the smaller lens.CelticJFK I do have a variety of LEDs that fit properly in the different fixtures.

[Herky96]

If you haven’t tried them I would try Premier RV in Junction City, OR. The acquired a lot of CC parts when CC went bankrupt.