Originally Posted by DirtyHarry
2003 36' Allura
My rear camera is working intermittently like a loose connection. Is there any common areas to look at that are prone to be the problem? The main switch is working all I'm getting is a black screen.
It would help to know what kind of system you have. Is it original?
If itís the old Panasonic monitor that hangs from the ceiling, there is a plug for the camera that pushes in and a collar that screws tight. There is also a 4 wire plug. Iím assuming one of them sends power to the camera. They both come loose or get bad connection.
The next option is to pull the camera, again donít loose the wires down the hole and plug it directly into the back of the monitor.
That failing, look for a replacement camera, buy from Amazon, you can always send it back.
Next is to try a different monitor.
Also while you have it apart you can check the cable. It probably has 4 wires. What I have done is made a pin that jumps two contacts then see if you get a zero ohms reading at the other end. Realize to check each wire, there will be like 16 combinations youíll have to try.