Community Forums

GoldenRetrieverAgility · 11-05-2021, 12:46 PM

Hi everyone,
We have a 2005 CC Inspire DaVinci 330 w/C9. I am attempting to replace all of the dash warning/indicator lights with LED's. Have removed all of the exposed screws and screw caps and it seems that there is still a connection somewhere nearest the steering column, but I can't see or feel where the attachment is. I am hoping that someone who has performed this task can advise what I am missing. I have attached a pic for reference.

Thanks,
BobM
2005 CC Inspire DaVinci 330 w/C9 #51335
Post Falls, ID

BrianGlenn · 11-05-2021, 08:22 PM

Hate to be the one to say this but…. My dash cover on the back slides back to expose the back of the dash lights. Some have a few screws holding it or Velcro. My 2007 Allure had nothing, just slides back.

Click image for larger version

Name: IMG_3590.jpg
Views: 32
Size: 213.2 KB
ID: 348216

Brian

2 Stroker · 11-05-2021, 10:59 PM

Like Brian said, I replaced all 19 of my lights with these.
https://www.superbrightleds.com/more.../#tab/Overview
2 stroker

GoldenRetrieverAgility · 11-06-2021, 07:44 AM

Thanks for the link, 2Stroker. As I interpret your response, you too have a dash that slides back to expose the back of the gauges on your '06 Inspire? Is that how you accessed your warning lights?
THX

2 Stroker · 11-06-2021, 01:48 PM

Quote:

Originally Posted by GoldenRetrieverAgility

Thanks for the link, 2Stroker. As I interpret your response, you too have a dash that slides back to expose the back of the gauges on your '06 Inspire? Is that how you accessed your warning lights?

THX

Yes, I have 3 buttons with screws but if I remember right there was a screw up from the under side on the far left side if you want to push the cover forward. I used blue tape to cover up the M/T holes plus if they don't light up rotate 180.
2 stroker

jfnf51678 · 11-11-2021, 06:48 AM

I have replaced my dash indicator lights with LED’s. However, due to an issue with the way the ABS system, Leave the ATC indicator as an incandescent bulb. Upon changing to LED for the ATC it began blinking. There is a thread on the website regarding this issue. I was unable to locate it. I would also recommend leaving the engine warning light as incandescent. When I swapped it out it stayed on in a dim state constantly although it would function correctly if needed. Since this light came directly from the computer I changed it back to incandescent. Discretion being the better part of valor. Hope this helps.