We are installing new Konis and new air bags at all 4 wheels, also the driver side front HT valve (the only remaining original). Can anyone advise me on the ride height specs for the front and rear axles and the procedures to achieve them.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I have a 1997 Allure 32ft on a Dyno Max chassis
Per my owners manual page UG3-47
Proper ride height is the distance between the center line of the wheel and the bottom of the frame tube. The ride height for your loaded suspension is 7.5 inches in the rear and 5.5 inches in the front.
If you do not have a owners manual I could send you copies of the ride height adjustment procedures. I will need a E- Mail address to send them to . Too hard for me to post them here.
Linear Mode
