Originally Posted by lkdg242
Hi all, I sure enjoy learning from all of your input. I have a Jayco 30Z. It came with one 12 volt battery. I am replacing that with two 6 volt batteries. How do I connect the cables to these batteries? There is one cable currently connected to the negative post on the 12 volt battery and there are 3 cables connected to the positive terminal on the 12-volt battery. The attached picture is of the original 12-volt hookup.
No picture BTW.......you will simply pick one positive terminal on one of the 6 V batteries and put all your positive cables there, then pick one negative terminal on the other battery and that is where the negative cable goes........then you will add a new cable which connects the unused positive and negative on each battery, this last cable is basically creating a 12V battery out of the (2) 6V batteries
Paul & Jean
2001 Alpine 36FDDS - 1600W Solar, 10,752 Wh (420Ah @24V) LifePO4
2014 Jeep Wrangler Unlimited Rubicon
2006 Alpenlite 32RL - Sold