Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Jayco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 03-05-2023, 09:39 AM   #1
Junior Member
 
Join Date: Oct 2021
Posts: 20
JayCommand Generator and A/C remote start

We are looking at purchasing a 2023 Pinnacle 36KPTS. Can you start the generator from the phone app? For example, when I am going down the highway and about an hour away from my destination I would like to be able to start the generator while going down the highway without pulling over. I would also like to start the A/C's while driving so the interior is cooled down when we arrive. I realize the bluetooth connection may be too far when in the cab of the truck but what if we have the BMPRO connected to a hotspot in the trailer so it is reachable from anywhere?Does anyone know for sure if both these are possible?
mtpocket21 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-07-2023, 07:04 AM   #2
Member
 
Join Date: Feb 2022
Posts: 39
I think you can, but you will have to disconnect one wire and cap it off from the Jaycommand node. This wires locks out motor functions while driving.

I disconnected this wire because it would lock out things when the 7 way plug is connected to the truck and cause much frustration.

The wire is #64 "brake high input" just press and hold the tab for that wire, pull out and cap.

The big problem is you'll have trouble knowing when the generator started and how long to hold the start button pressed. FYI...sometimes there is a delay when you press and sometimes you have to press the start button on the app more than one time. This has been my experience with an iPhone using it for all the motor functions.

I have done what you are wanting to do, but I would suggest pulling over at an exit and starting it up so you can listen to what is going on.
Learjet 1 is offline   Reply With Quote
Old 03-08-2023, 08:01 AM   #3
Junior Member
 
Join Date: Oct 2021
Posts: 20
Thanks
I appreciate the information and detail. I would think the jacks would still work using the buttons on the control unit with the 7 pin connected to get it off the truck. I can see the frustration that would cause such as pulling into a rest stop and needing to bump a slide out 6 inches so you can get to something. I guess they put that on there for the same reason they put the sticker that says don't pick up a running lawnmower to trim the hedges. I wonder if that wire only locks functions out or if it also impacts the brake actuator's? Have you confirmed its only purpose is to inconvenience the owner .

Quote:
Originally Posted by Learjet 1 View Post
I think you can, but you will have to disconnect one wire and cap it off from the Jaycommand node. This wires locks out motor functions while driving.

I disconnected this wire because it would lock out things when the 7 way plug is connected to the truck and cause much frustration.

The wire is #64 "brake high input" just press and hold the tab for that wire, pull out and cap.

The big problem is you'll have trouble knowing when the generator started and how long to hold the start button pressed. FYI...sometimes there is a delay when you press and sometimes you have to press the start button on the app more than one time. This has been my experience with an iPhone using it for all the motor functions.

I have done what you are wanting to do, but I would suggest pulling over at an exit and starting it up so you can listen to what is going on.
mtpocket21 is offline   Reply With Quote
Old 03-09-2023, 07:50 AM   #4
Member
 
Join Date: Feb 2022
Posts: 39
it doesn't change the braking...and yes, it was a big pain before I disconnected it.

I don't have young kids...but if you did and let them play with your phone they could open up the awning while driving...so use caution
Learjet 1 is offline   Reply With Quote
Old 03-29-2023, 12:01 PM   #5
Senior Member
 
loydt's Avatar
 
Join Date: Nov 2010
Location: Cornelius, NC
Posts: 114
This is good information. The Jaycommand lockout function is quite a pain sometimes. I have to cycle power on the jacks and hit retract all to get anything to work while plugged in to the truck. Then if I opened one of the truck doors I would have to do it all over again.
__________________
Loyd
2021 Jayco Seismic 4212
2018 Ram 3500 4x4 DRW
loydt is offline   Reply With Quote
Old 03-30-2023, 07:43 PM   #6
Member
 
Join Date: Feb 2022
Posts: 39
Quote:
Originally Posted by loydt View Post
This is good information. The Jaycommand lockout function is quite a pain sometimes. I have to cycle power on the jacks and hit retract all to get anything to work while plugged in to the truck. Then if I opened one of the truck doors I would have to do it all over again.
exactly !!!
Learjet 1 is offline   Reply With Quote
Old 03-31-2023, 06:52 AM   #7
Senior Member
 
loydt's Avatar
 
Join Date: Nov 2010
Location: Cornelius, NC
Posts: 114
I unhooked mine last night, will see how it works.

Mine wasn't one of the wires with a push/pull tab, it was just a wire with a spade connection on the top of the main control center, labeled 64. FYI.
__________________
Loyd
2021 Jayco Seismic 4212
2018 Ram 3500 4x4 DRW
loydt is offline   Reply With Quote
Old 03-31-2023, 09:09 AM   #8
Member
 
Join Date: Feb 2022
Posts: 39
I've had no downside with it disconnected...just don't let a kid play with the app since the Awnings and Slides can be moved going down the road.
Learjet 1 is offline   Reply With Quote
Reply

Tags
generator, jayco, remote



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
JAYCOMMAND/TravelLINK remote light switches melkyev Jayco Owner's Forum 0 09-26-2021 02:58 PM
Jaycommand Flavius Jayco Owner's Forum 4 08-25-2021 07:06 PM
HF Predator 3500 Inverter generator project to add remote start, remote choke, stop charles_2000 Gear and Product Discussions 20 10-30-2020 11:49 AM
2020 JayCommand Systems Controller akbarnetts Jayco Owner's Forum 9 03-05-2020 11:53 AM
Remote generator start and water pump switches not working bigbobmcc Monaco Owner's Forum 9 08-02-2012 07:31 AM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 08:36 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.