'02 Dynasty exchange of the two tie rod ends

[Georgie-Boy]

I've been trying to find the correct part number for the two tie rod ends on my Dynasty for a few hours now, but to no avail.
Not for the steering push rod (drag link)!
I have already ordered the two heads with the order number 817019/817018 but they do not fit.
I have now measured the two threads and I need 1 x UNF 1 1/4" - 12 and on the other side UNF 7/8" - 14, but even with this information I find different tie rod ends.
Can one of you tell me a correct number and if possible still a supplier for it?
The front axle is according to the type plate from Spicer with the PartNo.: 32875 and the Serial No.: HUOO165303.

Best thanks already
Greetings from Germany

Roland

[vito.a]

If you do not figure it out by Monday, call Source Engineering.
458-207-9442
Source Engineering Inc | Custom RV Chassis | Eugene, OR

Most of their guys worked at the Monaco factory years ago.

[Georgie-Boy]

I will call them on Monday, thanks for your support

When I have the correct part number I write it in this thread

[Georgie-Boy]

I have found and ordered the correct tie rod ends for my Monaco Dynasty. They are now mounted and the steering is almost backlash free again:

TRE2091R
https://www.danaaftermarket.com/spic...-axle-program-
TRE2090L
https://www.danaaftermarket.com/spic...-axle-program-

these are for the Spicer front axle with the following data on the nameplate:
Model E-1460W
Serial No.: HUOO165303
Cust. Part No : 01805056
Part No: 328075

Roland