RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Monaco Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 05-02-2009, 07:07 PM   #1
Senior Member
mfire1339's Avatar

Monaco Owners Club
Workhorse Chassis Owner
Join Date: Jun 2008
Location: Glendora Ca.
Posts: 1,444
04 Monarch 12v systems

We have owned our Monarch 16 months and I have some things that bug me. Looking for some direction. It's a "World Famous" Workhorse W22 chassis. When I installed the brake and lighting system to the 7 pin connector on the MH all work except the power to charge the jeep toad. Where do I look to find open circuit? Never had a dead batt in 14,000 miles but, I would like it to work. Next I drive with the camera on all the time to watch the toad but when I back up the camera goes blank in reverse. Works in all other gear positions. Last We have 4 rocker switches over radio named Gen, Batt boost, radio, and acc. What does that acc switch do? It is wired at the back of the switch to.....? Any and all help will be appreciated. Hope to meet some more folks at Quartzite this comming year. Really liked the place last year. Thanks again,

Mike Fire

2004 Monaco Monarch
Blueox, SMI, 1990 Wrangler YJ
mfire1339 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 05-03-2009, 09:08 PM   #2
Join Date: Apr 2009
Posts: 41
Blog Entries: 1

monaco doesn't give you a 12v charge circut. You have to run your own circut. Do it right, and use diode and a relay. Maybe your ACC switch is an ICC switch, I have never seen an ACC switch on any monaco product,
jethro is offline   Reply With Quote

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
How do you level a Monarch 30 SFS or PDD? brucemcdou Monaco Owner's Forum 5 05-08-2008 05:04 AM
12V Disconnect Switch - "AUX BATT" Spooky Winnebago Industries Owner's Forum 4 03-17-2008 08:05 AM
Oasis Vehicle Systems Poor Quality Chickadee Newmar Owner's Forum 21 02-09-2008 11:22 AM
Entertainment systems Navy Flier Winnebago Industries Owner's Forum 2 01-28-2008 12:44 PM
Low 12v voltage warning - help troubleshoot dmurdock 5th Wheel Discussion 7 11-19-2005 03:01 PM

» Featured Campgrounds

Reviews provided by

All times are GMT -6. The time now is 11:02 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.