04 Monarch 12v systems

[mfire1339]

We have owned our Monarch 16 months and I have some things that bug me. Looking for some direction. It's a "World Famous" Workhorse W22 chassis. When I installed the brake and lighting system to the 7 pin connector on the MH all work except the power to charge the jeep toad. Where do I look to find open circuit? Never had a dead batt in 14,000 miles but, I would like it to work. Next I drive with the camera on all the time to watch the toad but when I back up the camera goes blank in reverse. Works in all other gear positions. Last We have 4 rocker switches over radio named Gen, Batt boost, radio, and acc. What does that acc switch do? It is wired at the back of the switch to.....? Any and all help will be appreciated. Hope to meet some more folks at Quartzite this comming year. Really liked the place last year. Thanks again,

Mike Fire

[jethro]

monaco doesn't give you a 12v charge circut. You have to run your own circut. Do it right, and use diode and a relay. Maybe your ACC switch is an ICC switch, I have never seen an ACC switch on any monaco product,