Community Forums

FLYING BUTCH · 02-04-2019, 01:50 PM

When I try to turn the battery cut off (salesman) switch on the dash the light panels come off and on for just a second or so. Trying to locate new switch. In the mean time can anyone help me in hot wiring the switch (by pass) it? 4 poles one side and one on otherside. I looked through some other posts regarding this problem. I have large cut off switches by batteries in rear compartment. I thought I might be able to cross some wires over on the switch itself but it seems I need to cross some wires in outside compartment below driver. I just couldn't get a good understanding what wires and where the relay or solenoid is located??
thanks in advance for any assistance guys.

CountryB · 02-04-2019, 02:46 PM

Your coach may be a little different than my 2005 - but maybe the same in this regard.
The salesman's switch would be the smaller relay/solenoid of the two (with Big boy solenoid in center of photo being the larger one). This is what it looks like on the '05. It's in the chassis distribution compartment above the battery tray.

You would just move the heavy cable from one terminal to the terminal of the other heavy cable (so they are both on the same stud) to bypass it.