Quote:
Originally Posted by MichaelQuick
I just bought an 08 monaco 40skq and have found that i have a problem with a plugged up black tank flush line. Does anyone know where the vaccume breaker for the flush line is located??? .I can clean both directions if i can locate the vaccume breaker. HELP!!!!
|
I have been on another thread about the same problem. I have a 2005 Monaco Monarch 34 ft gas rig which may be a little different than yours. But I am trying to solve the same problem, tried several things as suggested from other forum members.
1. Try using air presure applied at the water inlet .....adapters can be found on Amazon. My efforts did not clear the blockage.
2. I found my vac valve under the bath sink. Removed it and found a stuck check valve inside the vac valve. Removed it and made sure vac valve is connected right and checked again with air pressure. Still plugged.
3. Next step is to remove the cleaner bar and clean out the jets. PROBLEM is how to get to the cleaner bar....no visable access. Anyone know how to get to it on a 2005 Monarch SE gas rig?
Good luck on your endeavors.
Paul