Community Forums

Ivylog · 06-26-2018, 08:05 PM

Fumble fingers blew the fuse that provides 12V power for the prewired brake controller wiring on my 08 Navigator. It’s the red wire that HAD power all the time. There is a fuse in the front run box labeled trailer brake but it’s still good.
Thanks in advance.

l1v3fr33ord1 · 06-27-2018, 03:55 AM

Ivylog-

The documentation I have for a 2007 Signature indicates the fuse is a 20A in position F7-3. Is that the one you checked?

Here is a link to a thread on a 2007 Executive. Some of the posts there may apply to your coach.

K7JV · 06-27-2018, 08:41 AM

I'm not sure if this will help, or not.

YC1 · 06-27-2018, 08:45 AM

Look in the passenger side back compartment. May be a fuse panel in there that controls the toad lights etc.

Ivylog · 06-27-2018, 09:23 AM

Thanks Mark & Jim as it is F7-3. I know better than to visually check a fuse but you could still see the Z in the 10A fuse at F7-3. I’m using it to power a 3way 12V outlet, keeping cords a little neater...not running across the dash to the 2 in the center console. Today you cannot have too many 12V outlets. Discovered the center of the three in the center consul is actually an Aux input, not a cigarette lighter outlet once I removed the black cover.