2004 Windsor Brakes

[mapmaker]

I have a 2004 Monaco Windsor PDQ and I am trying to find the part numbers for the front rotors, Pads, Bearings and seals. Also rear rotors and seals. I called Monaco and they say they do not have the numbers. Can anyone help.

Mapmaker

[jleamo1]

I went through his with ours. I pulled the wheels, bearings, seal, shoes and drums, went to a truck parts place and they had it all in stock. The axle manufacture has data on it, for the life of me I cannot find their information. My wheel ends are Bendix, I would guess yours are also. There was nothing strange or "RV specific" about any of it, it was all medium/heavy duty truck parts (depending on the weight rating of your specific axle. I also converted my front hubs to oil bath from grease packed, the wheel caps were Stemco and on the shelf.

[sledwest]

I have a monaco dip. and part numbers for wheel seals and inner and outer brg. numbers also shoes but not rotors will post tomorrow on this thread.

[sledwest]

Ok i have a 2003 monaco diplomat on a rsr8 roadmaster chassis. Yours may not be the same ?? Brake shoes are dana spicer 818570 /478. the hub nut size is a big one! 2 1/4 inch. Inner wheel bearings are timken hm 212049. The outer bearings are timken 3782. And finely the hub seals NON-OIL BATH are dana #504847 or skf scotseal 35058. Good luck!!

[luckyd]

The poster appears to be saying the front is Disc brakes if he is
looking for rotor numbers.
Disc is totally different than drums and shoes.

[jimmy braden]

I dont think any RV chassis other than spartan comes with disk brakes. Maybe country coach ( I seem to recall something about a dynamax something)