If yours is like our '06, they are controlled by the Intellitec system. If so, you should have a 1 amp fuse on the "C" module in the Intellitec panel, that provides operating power to the relay in the front run box. You will find a 10 amp fuse on board 11 in the front run box that provides the power to the lights, themselves. Then, you will find a 10 amp fuse on board 2, in the rear run box, that powers the two back-up lights on the rear cap of the coach that double as docking lights.
So, there should be three fuses. One in the Intellitec panel that would affect all of them, one in the front run box that would affect all of them, and one in the rear run box that would affect the two on the rear cap.
Let us know how you make out. Also, the schematic that I attached may give you some good information.
JV
|