Originally Posted by Sandy12
Take a knife and pop out the silver ring, at the gold junction... you do not need to remove the entire fixture. Glass and silver ring will come out. The best China LEDs ($1.13 each) are G4 12 5050SMD bulbs in daylight (pure or 5000 temp) which draw 1/10th the current.
Search EBay for “ 10X G4 DC 12V 5050 SMD 6/9/12 LED Car Boat Light Pure/Warm White Round Bulb Lamp”
Thanks for the information. Unfortunately for me the butter knife didn't work. What I did is took a small jewelers screw driver and went through one of the heat vent holes in the back of the fixture and pushed the lens out. I only go to this point after marring up the trim ring really good. You would figure that the product designers would have placed some sort of indent where you could slide a tool into it and pop out the ring.
But regardless,, thanks for the help.