|
07-21-2020, 03:04 PM
|
#1
|
Senior Member
Monaco Owners Club
Join Date: May 2006
Location: Pipe Creek, TX
Posts: 688
|
2008 Endeavor generator exhaust
Well, somehow my generator exhaust pipe got destroyed today while getting my yearly safety inspection, I went to open the generator door to change a headlight, and low and behold, there was the end of my exhaust pipe. I have a new pipe being fabricated, the problem is where does the pipe hanger go? Can’t even find a remanent of the upper part of the hanger, only a piece left on the tube. If anyone could get me a picture of yours, it would be greatly appreciated.
Thanks
Dennis
__________________
Dennis & Debbie Z (Retired) F415847
Pipe Creek, TX
2008 HR Endeavor 40PDQ / 2015 RAM 1500 Toad
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
07-21-2020, 03:11 PM
|
#2
|
Senior Member
Holiday Rambler Owners Club
Join Date: Jan 2020
Location: Santa Rosa, Ca
Posts: 420
|
Gen exhaust hanger
Here is mine, sorry always never right side up, operator error I guess
__________________
2017 Thor Four Winds 35SD
2020 Trailhawk toad
Semper Fi
|
|
|
07-21-2020, 04:27 PM
|
#3
|
Senior Member
Monaco Owners Club
Join Date: May 2006
Location: Pipe Creek, TX
Posts: 688
|
Pillbox
Thanks for the pictures, looks like I’m missing some bracing, unless a 2007 and 2008 are considerably different.
Thanks
Dennis
__________________
Dennis & Debbie Z (Retired) F415847
Pipe Creek, TX
2008 HR Endeavor 40PDQ / 2015 RAM 1500 Toad
|
|
|
07-21-2020, 04:38 PM
|
#4
|
Senior Member
Holiday Rambler Owners Club
Join Date: Jan 2020
Location: Santa Rosa, Ca
Posts: 420
|
The framing on mine actually is part of the generator slide.
If you need more pics let me know.
Terry
__________________
2017 Thor Four Winds 35SD
2020 Trailhawk toad
Semper Fi
|
|
|
07-21-2020, 05:02 PM
|
#5
|
Senior Member
Monaco Owners Club
Join Date: May 2006
Location: Pipe Creek, TX
Posts: 688
|
I’ll take all the extra pictures I can get, attached is a picture of whats left of mine, looks like the cross bar went missing somewhere, but I do have some extra brackets on mine also.
Dennis
__________________
Dennis & Debbie Z (Retired) F415847
Pipe Creek, TX
2008 HR Endeavor 40PDQ / 2015 RAM 1500 Toad
|
|
|
07-21-2020, 05:50 PM
|
#6
|
Senior Member
Join Date: Oct 2016
Posts: 1,801
|
Hi Dennis; Looks like the support tube that is welded to the stub of tubing straight down is missing. Looks like some parts are lying somewhere. Looks to me like you might need a new piece of tubbing welded on to support the generator exhaust pipe.
|
|
|
07-21-2020, 06:11 PM
|
#7
|
Senior Member
Monaco Owners Club
Join Date: May 2006
Location: Pipe Creek, TX
Posts: 688
|
Quote:
Originally Posted by 8.3Oilbuner
Hi Dennis; Looks like the support tube that is welded to the stub of tubing straight down is missing. Looks like some parts are lying somewhere. Looks to me like you might need a new piece of tubbing welded on to support the generator exhaust pipe.
|
Yep, this is what it appears, luckily, the bracket on mine is removeable, just got it out. Going to go to the metal supply to find some 1 1/2” tubing and some 3” plate.
If anyone has the dimensions for the end bracket where it outer support bolts on that would be handy, otherwise ti will be “kinda looks like this”.
Dennis
__________________
Dennis & Debbie Z (Retired) F415847
Pipe Creek, TX
2008 HR Endeavor 40PDQ / 2015 RAM 1500 Toad
|
|
|
07-21-2020, 07:55 PM
|
#8
|
Senior Member
Holiday Rambler Owners Club
Join Date: Jan 2020
Location: Santa Rosa, Ca
Posts: 420
|
Pics
Ok took lots of pics.
Dennis, need email, to many to put on forum.
__________________
2017 Thor Four Winds 35SD
2020 Trailhawk toad
Semper Fi
|
|
|
07-21-2020, 08:21 PM
|
#9
|
Senior Member
Monaco Owners Club
Join Date: May 2006
Location: Pipe Creek, TX
Posts: 688
|
Terry
I think I have a handle on it now, actually the piece that the lower cross bar is attached to is removable on mine, will make the repair much easier, no welding upside down.
Dennis
__________________
Dennis & Debbie Z (Retired) F415847
Pipe Creek, TX
2008 HR Endeavor 40PDQ / 2015 RAM 1500 Toad
|
|
|
07-23-2020, 01:29 PM
|
#10
|
Senior Member
Monaco Owners Club
Join Date: May 2006
Location: Pipe Creek, TX
Posts: 688
|
Alls well again, was able to have an new exhaust tube fabricated locally, with a little trimming, it fit perfectly. I was able to fabricate the new support piece with help from several board members providing dimensions and pictures. Hopefully we won’t go thru this needless exercise again.
__________________
Dennis & Debbie Z (Retired) F415847
Pipe Creek, TX
2008 HR Endeavor 40PDQ / 2015 RAM 1500 Toad
|
|
|
07-23-2020, 01:40 PM
|
#11
|
Senior Member
Holiday Rambler Owners Club
Join Date: Aug 2010
Posts: 9,732
|
Did ya mount it a few inches higher than the original?
__________________
Ben & Sharon
2008 43' Holiday Rambler Scepter PDQ
|
|
|
07-24-2020, 06:27 PM
|
#12
|
Senior Member
Monaco Owners Club
Join Date: May 2006
Location: Pipe Creek, TX
Posts: 688
|
No, it’s back to stock, I just won’t take it back to the same shop to get the inspection done, that’s the only place the damage could have happened. It was fine when I left home, and it was broke after they did their test drive, their place looks like a junk yard, could have easily snagged it on something in their yard.
__________________
Dennis & Debbie Z (Retired) F415847
Pipe Creek, TX
2008 HR Endeavor 40PDQ / 2015 RAM 1500 Toad
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|