iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
I did mine a few years back on a 2009 Monaco Monarch 33SFS.
Not an easy job but with the help of a couple of friends got the job done.
Not much room to get your hands between the slide and the frame.
We took turns and made a few tools to help pry the seal to the lip.
Thank you so much for the info. The seal looks exactly like the one we have. A couple of questions if you don't mind.
1. Did you pull the fabric on the slide topper or did you remove it? Ours looks quite heavy but does need new fabric. I am not sure that the wife and I can handle the entire unit standing on ladders.
2. Are the new seals bonded or glued in. It looks like they just slip on. I think the existing seals have some adhesive holding them in place.
I took the roller with fabric out of the end caps and laid on the roof.
There is a hole in the roller assembly that you put an Allen key in to stop if furling.
The metal clinch in mine had rusted and came off the edge in places, no adhesive was used before or after.
2009 Monaco Monarch 33SFS...Jeep TJ
Wintering in Apache Junction. Summer in Ontario.