This switch is on the steering column, and is a push in pull out type and is not working, so we have no brake or hazard flashing lights, does anyone have an idea or info of where to get replacement or fix?, thanks for the help, R Whit
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Sorry, just re read your post. Is the switch physically broken or do the lights simply not work? If the switch is broken you can call Monaco. If it is not broken and the lights simply don't work, check the fuse and the flasher unit.
__________________
Happy Camping, Safe travels and may our paths cross someday!
Had the same issue on my 97, since everything runs though the hazard switch the brake lights were also not working. I temporarily ran a wire from the two bottom terminals (red) on the hazard switch together so the brake lights would work, as we were about to hit the road.
I see no way to disassemble the hazard switch and lots of contact cleaner has not fixed it for me.