I've had problems with my ABS module several times. The button would actually get stuck in causing the light to stay on. Usually I could take compressed air and blow it out will tapping it quickly.
The last time this didn't work so I had to pop the top off the button. There is a small spring plate underneath the cover, there are 4 legs that hold the button off the contacts. I carefully slightly bent the 4 legs to elevate the plate higher above the contacts. That was ~2K miles ago and no other problems.
BTW, the ABS module is obsolete, there are a couple places that offer rebuilding with no guarantees.
__________________
Jim J
2002 Monaco Windsor 38 PKD Cummins ISC 350 8.3L
2005 Jeep Grand Cherokee w/5.7 Hemi
|