|
02-10-2010, 11:28 AM
|
#1
|
Senior Member
Join Date: Jan 2010
Posts: 178
|
Aladdin System
2005 Windsor. The Aladdin monitor system does not record Black or Grey water levels. I was told it needed to be 're-calibrated' to read the levels.
Anyone know how to do this or is this work for a trained tech?
The Goose
|
|
|
|
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
02-10-2010, 11:35 AM
|
#2
|
Senior Member
Newmar Owners Club
Join Date: Nov 2009
Location: Lincoln University, PA
Posts: 408
|
Try this. It's easy to calibrate on your own.
John D.
04 Imperial
__________________
2018 Newmar New Aire
2007 Country Coach Rhapsody
2004 Holiday Rambler Imperial
|
|
|
02-10-2010, 11:43 AM
|
#3
|
Senior Member
Join Date: Jan 2010
Posts: 178
|
Thanks Mr. Lab Rat. I am printing the process as we speak.
The Goose
|
|
|
02-27-2010, 09:49 PM
|
#4
|
Junior Member
Monaco Owners Club
Join Date: Feb 2010
Posts: 2
|
Another document that might be of assistance is Tank Measurements.pdf, which contains tank dimensions allowing calibration to be done by the Dry Full method. (I tried attaching this a couple times, each time Explorer locked up...I'm open to suggestions for alternate means of distributing this info.)
__________________
Dennis
Former Monaco Engineer
|
|
|
02-28-2010, 05:05 AM
|
#5
|
Senior Member
Newmar Owners Club
Join Date: Nov 2009
Location: Lincoln University, PA
Posts: 408
|
Quote:
Originally Posted by AladdinEngr
Another document that might be of assistance is Tank Measurements.pdf, which contains tank dimensions allowing calibration to be done by the Dry Full method. (I tried attaching this a couple times, each time Explorer locked up...I'm open to suggestions for alternate means of distributing this info.)
|
The tank dimensions are in the PDF that I posted, so I think he's covered.
John
2004 Imperial
__________________
2018 Newmar New Aire
2007 Country Coach Rhapsody
2004 Holiday Rambler Imperial
|
|
|
02-28-2010, 07:56 AM
|
#6
|
Senior Member
Join Date: Dec 2007
Posts: 189
|
On my 05 Dynasty unfortunately Monaco put the level sensors on the bottom of both the grey and black tanks. These sensors are actually pressure transducers measuring liquid head and over time they fill with debris and in effect are plugged. It may be possible to clean them.
I have purchased replacement sensors from,
http://www.bestconverter.com/
|
|
|
02-28-2010, 10:19 AM
|
#7
|
Registered User
Join Date: Aug 2009
Posts: 256
|
Quote:
Originally Posted by AladdinEngr
Another document that might be of assistance is Tank Measurements.pdf, which contains tank dimensions allowing calibration to be done by the Dry Full method. (I tried attaching this a couple times, each time Explorer locked up...I'm open to suggestions for alternate means of distributing this info.)
|
You can e-mail it to MonacoMama by using the following addy. IRV2 s mama @ gmail.com Remove the spaces.
|
|
|
04-21-2010, 12:46 PM
|
#8
|
Junior Member
Freightliner Owners Club
Join Date: Sep 2009
Location: Euless, TX
Posts: 28
|
Does anyone have the procedures for calibrating the Alladin to the See Level monitoring system?
I have my '04 Windsor at See Level in Grandbury Tx having the monitoring sytem installed.
I was advised that I would need to calibrate the Alladin to the See Level system once it was installed.
Looking for someone with a little experience.
Bobby B 2004 Windsor
|
|
|
04-24-2010, 10:59 AM
|
#9
|
Senior Member
Join Date: Oct 2003
Posts: 244
|
Quote:
Originally Posted by bobbflas
Does anyone have the procedures for calibrating the Alladin to the See Level monitoring system?
I have my '04 Windsor at See Level in Grandbury Tx having the monitoring sytem installed.
I was advised that I would need to calibrate the Alladin to the See Level system once it was installed.
Looking for someone with a little experience.
Bobby B 2004 Windsor
|
When I installed mine, I simply went through the regular Aladdin calibration process, as documented in the Aladdin manual.
__________________
Dave Rudisill
2004 Beaver Monterey - Fulltiming since August 2002
|
|
|
04-29-2010, 04:10 PM
|
#10
|
Junior Member
Freightliner Owners Club
Join Date: Sep 2009
Location: Euless, TX
Posts: 28
|
I was trying to make it harder than it was, pretty simple once I got the hang of it.
Thanks for the reply.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|