I looked and never found my reset button so I just wired my own in. I then went through the reprogramming.
My lock code is 555. When I use the keypad to open the front door, as soon as I put in my entry code if I push the 7/8 tab it will open my bay doors.
Do you have the manual on the remote entry??? Are you following the correct process/procedure??
This is what was in my manual
If the remote does not respond, it may need authorization.
Locate the keyless entry receiver box behind the instrument cluster.
Unplug the receiver box. Plug receiver box back in.
Within three seconds, press the lock button on one the remote. The entry door should lock
Press the lock button on the other remote.
I have heard that the key pads will go bad and ultimately make the whole system inoperable. Is your key pad in good shape, has it kept out the moisture.