Am I supposed to have weep-hole covers?

[YC1]

My suggestion of using the tape did not detail it very well.

Turning the tape over to the sticky side and placing a narrow strip of the same tape prevents it from sticking along that path. That path is over the slots in my window sills. The slots run all around the sills. So there is virtually the same amount of area where water can drain.

There is no wind noise with this simple mod either.

[windsorbill]

Originally Posted by RoadTrip2084

Thanks everyone for the suggestions.

I have a friend who's handy with a 3D printer who is willing to try to make some for me. I have to remove one of my 2 remaining ones from the window and give it to him to model. Since it's winter here now, I'm thinking I'll wait for a warm sunny day so the plastic will be more flexible before I try to remove it. Any suggestions on how to remove it safely? Pinch the arms inward so they stop latching on the outside of the holes?

In the meantime, I may try taping over the front window holes the next time I need to drive the coach to see if it reduces the wind whistling sound coming from the front right side.

I believe you have Atwood windows. They were bought out by Dometic about 2014.

The weep hole covers came in LEFT and RIGHT. They are not interchangeable, so if your buddy is making them, he might consider making both.

[RoadTrip2084]

I've confirmed that the driver's side window that still has the covers is Atwood, it's molded into the covers. My other windows just have "Tempered" and some numbers and such on the glass.

Originally Posted by dverstra

I’ve made some with a 3D printer. Not sure if we had the right material for retailing them though

Excellent. Were they for Atwood windows? If so, would you be willing to share the file?