Atwood Furnace Circuit Board Part No.?

[broadrun]

My furnace intermittently lights. The fan always works but it only ignites occasionally. I did a bench test on the sail switch and it's fine. Thinking it's either the time delay relay or the circuit board. My problem is I can't, for the life of me, find the part number for the circuit board. I took it out and it shows the following but I'd like to upgrade to a Dinosaur Electronics board and can't find the correct cross match number:

It shows 06-235773-004 on the board and it's from an Atwood 8940-iii-dclp furnace.

If anyone has any info I'd appreciate the assist.

[fairway2002]

Originally Posted by broadrun

My furnace intermittently lights. The fan always works but it only ignites occasionally. I did a bench test on the sail switch and it's fine. Thinking it's either the time delay relay or the circuit board. My problem is I can't, for the life of me, find the part number for the circuit board. I took it out and it shows the following but I'd like to upgrade to a Dinosaur Electronics board and can't find the correct cross match number:

It shows 06-235773-004 on the board and it's from an Atwood 8940-iii-dclp furnace.

If anyone has any info I'd appreciate the assist.

Amazon has them. Put furnace model in.

[broadrun]

Amazon was the first place I looked and it pulled up several circuit boards but then my furnace model wasn't captured in the list showing compatible units.

I always come across issues like this on a weekend when Dometic customer service is offline.

Guess I'll call Monday morning.

Thanks.

[shootist]

Originally Posted by broadrun

My furnace intermittently lights. The fan always works but it only ignites occasionally. I did a bench test on the sail switch and it's fine. Thinking it's either the time delay relay or the circuit board. My problem is I can't, for the life of me, find the part number for the circuit board. I took it out and it shows the following but I'd like to upgrade to a Dinosaur Electronics board and can't find the correct cross match number:

It shows 06-235773-004 on the board and it's from an Atwood 8940-iii-dclp furnace.

If anyone has any info I'd appreciate the assist.

Dinosaur is an aftermarket company that builds "better" boards. Good reputation. Call them.